高级检索

    基于FZI约束的辫状河三角洲致密砂岩储层测井智能分类方法

    Intelligent well log-based classification of tight sandstone reservoirs in braided river deltas with FZI constraints

    • 摘要: 辫状河三角洲沉积致密砂岩储层普遍具有低孔、低渗、孔喉结构复杂及非均质性强等特征,常规测井解释多依赖单一参数或经验判别,难以同时反映储层的储集能力与渗流能力,导致储层分类精度和可解释性受限。针对上述问题,提出一种基于流动单元指数约束的致密砂岩储层测井智能分类方法。首先,根据研究区岩石物理实验结果计算岩心流动单元指数(Flow unit index,FZI),采用累计频率法对岩心FZI进行分类,并建立储层分类指示参数F的判定标准。利用中子—密度交会法计算储层孔隙度,结合孔渗实验结果建立渗透率模型以计算储层渗透率,再基于计算得到的储层孔隙度与渗透率,计算研究区储层测井FZI及分类指示参数F。最后,以GR、AC、DEN、CNL、RD等常规测井曲线,以及模型计算的孔隙度、渗透率、FZI、F为输入数据,将F与常规测井曲线共同构成输入特征向量,使聚类受到渗流物理约束,同时,采用高斯混合聚类算法实现致密砂岩储层智能分类,并建立相应分类标准。将该方法应用于准噶尔盆地盆1井西周缘典型的辫状河三角洲沉积区,实现了低孔低渗储层的精细分类,明确了储层类别与含气性的对应关系。应用结果表明,该方法可有效提高储层分类的准确性,并具备向其它低孔低渗致密砂岩储层推广应用的潜力。

       

      Abstract: Tight sandstone reservoirs deposited in braided river deltas are generally characterized by low porosity, low permeability, complex pore-throat structures, and strong heterogeneity. Conventional well log interpretation methods mostly rely on single parameters or empirical criteria, making it difficult to simultaneously characterize reservoir porosity and permeability, thus limiting the accuracy and interpretability of reservoir classification. To address these issues, this study proposes an intelligent well logging classification method for tight sandstone reservoirs based on flow zone index (FZI) constraints. First, core FZI is calculated using rock physics experimental data from the study area, and the cumulative frequency method is applied to classify FZI values and establish the classification criterion for reservoir indicator F. Then, reservoir porosity is calculated using the neutron–density crossplot method, and a permeability model is established from porosity–permeability experimental data to estimate reservoir permeability. Based on the calculated porosity and permeability, the logging-derived FZI and classification indicator F are further computed for the study area. Finally, conventional log curves, including GR, AC, DEN, CNL, and RD, together with the model-derived porosity, permeability, FZI, and F, are used as input data. F is incorporated with the conventional log curves to form the input feature vector, thereby imposing seepage-physics constraints on the clustering process. A Gaussian Mixture Model (GMM) is then employed to achieve intelligent classification of tight sandstone reservoirs and establish the corresponding classification criteria. The proposed method is applied to a typical braided-river-delta depositional area in the western margin of Well Pen-1 in the Junggar Basin, achieving fine classification of low-porosity and low-permeability reservoirs and clarifying the relationship between reservoir types and gas-bearing properties. The results demonstrate that this method effectively improves the accuracy of reservoir classification and shows strong potential for application to other tight sandstone reservoirs with low porosity and low permeability.

       

    /

    返回文章
    返回